16" WCTB PCB

Home > CLASSIC TBARS > 16 INCH >

16" WCTB PCB

Our Price: $279.99

Quantity in Stock:(Out of Stock)

Availability:: Usually Ships in 1 to 5 Business Days
Product Code: WC152

Qty:

Description

Features of your 16� Westcoast-Tbars

Metal: 1080 mild gauge steel tubing
Coating: Powdercoated
Color: Gloss Black
*Powdercoating ends 4 inches before each side for easier installation of your controls

Top Crossbar:
- 1 1/4" swaged (tapered) down to 1"diameter. Both sides have5/8" holes are punched for internal wiring. (Fits conventional controls)
- Cross width is 28" across and pullback is 2 1/2".
- Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.
- Heated grips compatible

Risers:
- All cuts and holes are made by Laser cutting
- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps)
- 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.
- 3/4" diameter cross bar welded at the bottom of the risers above the internal wiring holes 4" from the bottom of the riser. (This makes the handlebar compatible with road glides).

Riser Bungs:
- These bungs are designed to be a steel 1 piece, 3 tier design. First tier fits inside the 1 1/4� tubing. Second tier meets flush with the bottom of the risers and is TIG welded bonding the bung to the riser. The third tier widens to 1 1/2� and is hollowed out 1/4� deep. This eliminates the need of a traditional washer setup, the handlebar bushing fits perfectly inside the custom bung.

Recommendations:
- Heavy Duty Bushings
- Grade 8 or Grade 9 (L9) bolts

Keynote:
- Risers are 16" tall and the top cross bar is welded on top of riser tubes. 17" overall including top crossbar.
- 6 total weld points

Share your knowledge of this product. Be the first to write a review »