16" MXTBARS RAW

Home > MXTBARS > 16 INCH >

16" MXTBARS RAW

Our Price: $254.99

Quantity in Stock:(Out of Stock)

Availability:: Usually Ships in 1 to 5 Business Days
Product Code: WC251

Qty:

Description

Features of your 16" Westcoast-Mxtbars

Metal: 1080 mild gauge steel tubing
Coating: Raw metal
*Powdercoating ends 4 inches before each side for easier installation of your controls

Top Crossbar:
- 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter.(All one piece) (Fits conventional controls)
- Both sides have 5/8" Holes punched for internal wiring and Bored out for heated grips
- Cross width is 31 1/2" across and pullback is 3 1/2".
- Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.
- Come standard with Throttle By wire (Fly by wire) on throttle side.
- Heated grips compatible

Risers:
- All cuts and holes are made
- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps)
- 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Riser Bungs:
- These bungs are designed to be a steel 1 piece, 3 tier design. First tier fits inside the 1 1/4� tubing. Second tier meets flush with the bottom of the risers and is TIG welded bonding the bung to the riser. The third tier widens to 1 1/2� and is hollowed out 1/4� deep. This eliminates the need of a traditional washer setup, the handlebar bushing fits perfectly inside the custom bung.

Recommendations:
- Heavy Duty Bushings
- Grade 8 or Grade 9 (L9) bolts

Keynote:
- These Handlebars are measured by overall height 14 inch risers with the 2 inch rise on the top cross bar equals 8 inches.
- 6 total weld points

Share your knowledge of this product. Be the first to write a review »